Home and Style

Making corners in the living room - fill the void (55 photos)

Pin
Send
Share
Send
Send


At the beginning of this article should emphasize the importance of finishing and filling the corners in the apartment. If your family has kids or playful pets, you risk losing the gloss of the unformed corners of the room, as plaster is not a durable material for decoration. Wallpapers covering corners are pressed through, torn, and irregularities appear on them.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-2


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-3


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-4


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-5


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-6


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-8


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-9


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-10


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-11


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-12

The decor of the corners also includes the decoration of objects, such as vases or figurines. This emphasizes the style of the room, fills the void and generally puts an end to the proper design of your home.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-13


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-14


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-15


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-16


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-17


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-18

In order to most reliably decorate the outer corners of the walls, such strong substances as metal, plastic, wood, stone, and also expanded polystyrene will suit. As a rule, special corners are made of them, which are mounted on the already plastered corners with the help of mounting mixtures.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-20


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-21


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto.jpeg">


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-23


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-24


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-25

Consider the most appropriate materials.

Tree

This is quite a capricious material that does not withstand high humidity and temperature changes. However, it has several advantages: safety for the environment, external attractiveness, the possibility of carving. In general, wood is a very stylish element of decor.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-27


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-28


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-29


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-30


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-31

There are two ways of fixing plastic corners. The first implies a preliminary alignment of the corner with a putty on which the corner is then glued. After that, the final layer of putty should be applied to the structure and, after drying, should be sanded.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-35


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-36


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-37


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-38


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-39

Before laying the stone you will need to clean the surface, and if it is too dry, give it moisture for better penetration of glue. The finished mortar is applied on the stone itself, including the edges, as well as on the wall. Next, you need to firmly press the stone to the wall and check whether it is evenly installed using a cord plumb and a spirit level.

And most importantly: after gluing 3 rows of stones, you must wait two hours for the glue to fully grab and then continue to work. If not to make a break, there is a big risk of collapse of the whole structure.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-41


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-42

There is also a frame method that is fraught with certain difficulties. It is used when there is a large level of curvature of the angle and when it is necessary to strengthen the insulation of noise and heat.

Stages finish frame method:

  1. determine the level of curvature of the angle;
  2. install the metal frame (profiles) on the screws;
  3. then you need to install the drywall itself and also fix it with screws;
  4. cover the put sheets with putty and polish them.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-2.jpeg">


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-43

Ceiling trim

Ceiling joints require a lighter material than walls. Polyurethane and polystyrene skirtings are running gears, which are quite cheap, easy to cut and have an attractive appearance. For cutting skirting foam, use a thin, well-sharpened, stationery knife.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-44


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-45

If the room has even lines of angles, then for cutting it is best to use a miter box - a special tool with cut patterns for cutting at 90 ° and 45 °. Before applying the adhesive, carefully measure the correctness of trimming the skirting board. The ceiling is an element of the house, which will definitely pay attention to, and the shortcomings will be visible. In this case, microscopic deviations are better to simply putty.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-46


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-47

If you do not have a flush - it does not matter. To cut corners correctly, follow the instructions:

  1. Take a small strip of plinth, a solid well-sharpened pencil, a ruler and a stationery knife or a saw, depending on the material used.
  2. Attach the prepared piece of plinth to one of the corners of the ceiling and mark the line along the edge on the ceiling, do the same in the opposite corner, marking the junction of the corners.
  3. Further, on the basis of the obtained calculations, it will not be difficult for you to cut off the corners and dock them. It works on both outside and inside corners.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-48


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-49

Filling the Void: Decorating with Objects

When the architectural angle cut is completed, it needs to be visually filled (we are talking only about the inner corners). For this purpose, great fit vases. They should be selected based on the proportions of the room. For example, the wider the room, the wider the vase should be. Also, do not put too short vases, as it looks inorganic.

Floor lamps emphasize the style of the room and will serve you as an additional source of light.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-50


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-51

On decorative tables, you can install photos of relatives, home phone, or even a small elegant aquarium with a goldfish. Figurines will also fit into the decor of the corners.


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-52


oformlenie-uglov-v-zhilom-pomeshenii-zapolnyaem-pustotu-55-foto-53

The installation of suitable decorations is the final touch in the design of the corners, which will make them truly cozy and stylish. Good luck with your repair!

Pin
Send
Share
Send
Send